10   인치   알루미늄   분지   프레임   스피커   액세서리   알루미늄   다이 캐스팅   분지   프레임

10 인치 알루미늄 분지 프레임 스피커 액세서리 알루미늄 다이 캐스팅 분지 프레임

10 인치 알루미늄 분지 프레임 스피커 액세서리 알루미늄 다이 캐스팅 분지 프레임
문의 보내기
제품 소개

10 인치 알루미늄 분지 프레임 스피커 액세서리 알루미늄 다이 캐스팅 분지 프레임

모델 No:250-699

모델:

250-699

외부 직경

261.4 밀리미터

직경 의 콘

255.7 밀리미터

직경 의 댐퍼

206 밀리미터

110.5 밀리미터

유효 높이

44.3 밀리미터

직경 의 리벳 구멍

6*135*6.5                                  

직경 의 마운팅 구멍

8*247*6.5

product-1200-1200

 

IS 더 더 높은 더 파워 의 그 뿔, 더 더 나은?


그만큼 파워 의 스피커 is 분할 into two types: 정격 파워 및 피크 파워. 더 파워 표시 by 스피커 in the 시장 is 일반적으로 the 피크 파워, which is also the 최대 파워 that can be 달성 by 자신. 이 하이파워 스피커 자주 된다 그것 판매 포인트 및 a 기믹 홍보를 위해. 많은 사람 누구 아니 친숙한 자동차 사운드 시스템 느낌 그 그 더 높은 더 스피커 파워, 더 더 나은, 그래서 그들 맹목적으로 접근 그것.
In fact, the 최대 전력 of a 스피커 자주 그렇지 않음 needed, and even if the 볼륨 is turned up to its 최대 동안 사용, the 사운드 cannot reach a high fidelity state. If the power of the 자동차 오디오 시스템 is 일정하게 초과 by the matching power of the vehicle's electrical equipment, it will cause the car battery to be in a state of long-term battery depletion, thereby 배터리 수명에 영향을 미칩니다.
그만큼 파워 의 a 자동차 경적 참조 에 더 양 의 파워 그것 캔 견디기, which is not 관련된 to 사운드 품질, but 오히려 to the 파워 의 the 앰프. 더 사운드 방출 의해 the 스피커 필요 an 증폭기, which has a 높은 파워 및 can boost the speaker, 결과 in better sound quality.
example, if a 스피커 with a 정격 power of 60W is paired with a 100W power ampliifier, the distortion of the speaker will be relatively reduced, and the sound quality can be guaranteed. There is also talk of distortion in power ampliifiers. A 100W power ampliifier can only turn on 50W at half the volume, resulting in low distortion and significantly improved sound quality.
A 50W 전원 앰프, 포함 만 절반 의 the 25W 회전 켜기, 있다 좋은 사운드 품질, but 만 25W, the 사운드 의지 be 많이 낮은, which only has charm when the 볼륨 is 낮음. 만약 당신 드라이브 50W, 더 사운드 쉽게 깨진 및 그 손실 is 시끄러운. So, a 25W 스피커 페어링 a 50W 앰프 is better than a 25W 앰프. 의 코스, 더 파워 의 더 파워 앰프 is not 필연적으로 the better, and it cannot be determined based on actual situations.

유지 the "margin" of the ampliifier is an important factor in the matching of car audio systems. Considering the extremely limited electrical energy in the car, ensuring that the rated power of the power ampliifier is 약간 higher than the rated power of the horn is the most optimal choice.
To make the sound quality of the speaker sound resistant, in addition to the hardware design of the speaker, the selection of power ampliifier or DSP power ampliifier also needs to be matched, and finally, installation and debugging. There should be no mistakes in every aspect of equipment quality, matching, installation, debugging, and car audio modification, else there is no need to discuss sound quality. So, 판단 사운드 품질 효과 기반 켜기 파워 의 스피커 is 단면.

product-800-2345

product-800-1968

Delivery terms:

결제 통화: USD, EUR, RMB입니다.

결제 방법: T/T, L/C, 머니그램, PayPal, 서부 유니온;

포트: 닝보/상하이 포트

1.누가 아르 we?

우리 are based in Zhejiang, China, start from 2018,sell to Eastern Europe(50.00%),Southern Europe(20.00%),South Asia(20.{{}}%),South America(10.00%). There are total about 5-10 people in our office.

2. 방법 할 수 있 우리 보증 품질?

항상 a 사전 제작 샘플 전 질량 생산; 항상 최종 검사 전 선적;

3.무엇 할 수 당신 구매 보낸 사람 us % 3f

스피커, 스피커 액세서리,오디오 시스템 머신,믹서,스피커 박스

인기 탭: 10 인치 알루미늄 분지 프레임 스피커 액세서리 알루미늄 다이 캐스팅 분지 프레임 % 2c 중국 % 2c 공급 업체 % 2c 공장 % 2c 제조 % 2c 사용자 정의 % 2c 도매 % 2c 구매 할인

문의 보내기

whatsapp

전화

이메일

문의